Fujitsu PRIMERGY BX600 S3 Hardware Manual page 52

Chapter 4 Installing Options
4
Remove the dummy PSU.
Remove the dummy PSU using both hands.
Be sure to keep the removed dummy PSU for
later use.
5
Install the PSU.
Check that the handle of the PSU is lowered. If
not, pull it down.
1. Using both hands, insert the PSU into
the PSU slot.
2. Pull up the handle to insert the PSU.
6
Connect the power supply cable to the PSU.
■ How to remove a PSU
To remove, simply reverse the installation procedure in "
• Do not operate when the PSU or dummy PSU has been removed.
52
When installing a PSU, check that the connector pins at the rear of the PSU are not
damaged or bent.
Check that PSU is inserted firmly to the back of the PSU slot.
(1)
■
How to install a PSU" ( p.51).
(2)