Fujitsu PRIMERGY BX600 S3 Hardware Manual page 36

Chapter 4 Installing Options
4
Remove the Server Blade/Storage Blade.
1. Push the release latches outwards while
pressing the green parts to unlock the
lock.
2. Pull the Server Blade/Storage Blade and
remove.
Use both hands to pull out the Server Blade/
Storage Blade.
5
Install the Server Blade/Storage Blade.
■
" How to install a Server Blade/Storage Blade" (p.36)
When multiple Server Blades are installed to the Chassis, before removing, use the Server Blade
identification function to check the position of the Server Blade. For details about the Server Blade
identification function refer to "BX600 Management Blade Hardware Guide".
Do not operate the Chassis with an empty slot. Be sure to install a Server Blade/Storage Blade/
dummy Server Blade.
The procedure for removing the dummy Server Blade is the same as that for removing the Server
Blade/Storage Blade.
Be sure to keep the removed dummy units for later use.
■ How to install a Server Blade/Storage Blade
1
Remove the Server Blade/Storage Blade/dummy Server Blade.
Remove any Server Blade/Storage Blade/dummy Server Blade installed to the slot for
installation.
■
" How to remove Server Blades/Storage Blades" (p.35)
No Server Blade/Storage Blade is installed at the time of purchase. This procedure is not required
for the first installation.
36
Open the release
latches while
pressing the green parts.
(1)
(2)
(1)