Removing/Replacing Canister Filter - Grizzly G0852 Owner's Manual

Removing/Replacing
Canister Filter
Dust
while
may cause cancer, birth
defects, or long-term respi-
ratory
wear goggles and a NIOSH-
approved respirator when
working with the dust col-
lection bags or canisters.
If the canister filter is clogged or dirty and cleaning
it does not improve dust-collection performance,
the canister filter must be replaced.
Items Needed
An Assistant ...................................................... 1
Wrench or Socket 12mm ................................... 1
Wrench or Socket 10mm ................................... 1
Hex Wrench 5mm .............................................. 1
Shop Vac ........................................................... 1
Canister Filter T30321 ....................................... 1
Filter Bag T28925 .............................................. 1
To remove and replace canister filter:
1.
DISCONNECT MACHINE FROM POWER!
Model G0852 (Mfd. Since 12/18)
exposure created
using machinery
damage. Always
Qty
2. Release bag clamp, then remove filter bag
(see Figure 63).
IMPORTANT: To contain wood dust and
minimize exposure risk, firmly tie bag closed
after removal and dispose of properly.
Figure 63. Filter bag components.
3. Remove (2) ⁄ "-18 x 2
5
16
filter cleaning handle assembly to canister
filter, then lift off handle (see Figure 64).
x 2
Figure 64. Filter cleaning handle fasteners.
Canister
Filter
Bag
Clamp
Filter
Bag
⁄ " hex bolts securing
1
2
Filter
Cleaning
Handle
Assembly
-39-