Siemens SIMATIC S7-1200 CP 1243-8 IRC Operating Instructions Manual page 30

Application and functions
1.9 Configuration examples
SMS messages and e-mails
Figure 1-6
SMS
The CP can send SMS messages to a mobile phone. SMS messages are generated and
sent due to events. You will find the description of the configuration in the following sections:
Data point configuration (Page 128)
Message configuration (Page 163)
E-mails
The CP can send e-mails to a PC with an Internet connection or a mobile phone. The
mechanisms for this are as follows:
● E-mails that are generated by the telecontrol application.
E-mails are generated and sent due to events. You will find the description of the
configuration in the following sections:
Data point configuration (Page 128)
Message configuration (Page 163)
TheE-mail configuration (Page 110)
● E-mails sent as a result of calling the program block TMAIL_C.
You will find information on the blocks in the section Program blocks (Page 167). You will
find the description of the programming in the STEP 7 information system.
30
Sending messages by SMS from an S7-1200 station
Operating Instructions, 02/2018, C79000-G8976-C385-03
CP 1243-8 IRC