Analog Outputs - Emerson Vilter Vission 20/20 Operation And Service Manual

Section 12 • Service Options

Analog Outputs

The Analog Output (AO) selections allow the operator
to enter a desired value of the output then turn on the
output, see Figure 12-5. Service Options Screen - Analog
Outputs (Page 4). The operator will have to measure
the output using meter capable of measuring a 4-20mA
signal.
Compressor VFD:
• Sets the analog output assigned to the compressor
VFD. The output is connected to AO #1 on card 10.
Condenser / Remote Oil Cooler VFD:
• Sets the analog output assigned to the Condenser /
Remote Oil Cooler VFD. The output is connected to
AO #2 on card 10.
Figure 12-5. Service Options Screen - Analog Outputs (Page 4)
Vission 20/20 • Operation and Service Manual •Vilter/Emerson • 35391SC 1.9
% Slide Valve Position
• Sets the analog output assigned to the Slide Value
position used to inform a central control system of
the capacity position. The output is connected to AO
#3 on card 10.
Liquid injection Motorized Valve:
• Sets the analog output assigned to the liquid injec-
tion motorized value position. The output is connect-
ed to AO #4 on card 10.
12 – 5