Interval Setting For The Duplicate Scanning; Time Interval Setting - Inateck BCST-50 Supplementary Manual

6. Interval Setting for the Duplicate Scanning

Avoid duplicate scanning via the setting below, especially under continuous
scanning mode and auto-induction mode.
Enable Interval Setting for Duplicate Scanning

6.1 Time Interval Setting

Example
You do not want the scanner to scan one code twice within 1000ms. The settings
below may help you.
1. Scan the two-dimensional code "Enable Interval Setting for Duplicate Scanning"
2. Scan the two-dimensional code "1000ms".
To recover to default setting, scan the two-dimensional code "(*) Disable Interval
Setting for Duplicate Scanning".
4
500ms
3000ms
（*）Disable Interval Setting for Duplicate Scanning
1000ms
5000ms