BMW iDrive 6.0 Manual page 86

COMMUNICATION
▷ Charge the BMW Display key, see Owner's
Manual for the vehicle.
▷ Connect the mobile phone to the external an‐
tenna.
Depending on the country, this provides for
better network reception and a consistent re‐
production quality.
General information
When inserting the mobile phone, make sure
there are no objects between it and the wireless
charging tray.
During charging, the surface of the tray and the
mobile phone may become warm. Higher tem‐
peratures may lead to a reduction in the charging
current, and in isolated cases the charging proc‐
ess is paused temporarily.
If the vehicle is equipped with a charge indi‐
cator, the Control Display shows whether a mo‐
bile phone with Qi capability is being charged.
NOTE
This device has been tested for human exposure
limits and found compliant at a minimum dis‐
tance of 4 in/10 cm during operation.
Therefore, a distance of 4 in/10 cm must be
maintained in every direction when operating the
device.
Storage in vertical position:
Mounting position of the product.
Storage in horizontal position:
86
Telephone
Online Edition for Part no. 01402989211 - II/18
Mounting position of the product.
Storage tray:
Mounting position of the product.
Safety information
NOTE
The tray is intended for mobile phones up to a
particular size. Forceful inserting of the mobile
phone into the tray can damage the tray or the
mobile phone. There is a risk of damage to
property. Observe the maximum dimensions for
mobile phones. Do not force the mobile phone
into the tray.
WARNING
When charging a device that meets the Qi
standard in the wireless charging tray, any
metal objects located between the device and
the tray can become very hot. There is a risk of
injury and risk of damage to property. When
charging mobile devices, make sure there are
no objects between the device and the tray.