BMW iDrive 6.0 Manual page 20

NAVIGATION
Changing the route details
Concept
With active destination guidance, the route dis‐
played on the map can be adjusted manually. To
do this, use a marking point on the route, the
'route magnet,' to drag the route in the desired
direction.
Setting a route magnet
1. "Navigation"
2. "Map"
3. Move the Controller to the left.
4. "Route"
5. "Change route"
6. "Add route magnet"
7. As with the interactive map, drag route mag‐
net to the desired location using the Control‐
ler:
▷ To change the scale: turn the Controller.
▷ To shift the map: move the Controller in
the required direction.
▷ To shift the map diagonally: move the
Controller in the required direction and
turn it.
8. Press the Controller.
9. "Accept magnet"
Editing a route magnet
1. "Navigation"
2. "Map"
3. Move the Controller to the left.
4. "Route"
5. "Change route"
6. Select desired setting:
▷ "Modify route magnet": modify changed
route once more.
▷ "Remove route magnet": the original
route is restored.
20
Map
Online Edition for Part no. 01402989211 - II/18
In the Professional navigation
system: simulating destination
guidance
Concept
While the vehicle is stopped and destination
guidance is active, driving on the route can be si‐
mulated.
Open
1. "Navigation"
2. "Map"
3. "Route"
4. "Route flyover"
The route is displayed on the map.
Functions and settings
Move the Controller to the left to call up addi‐
tional functions and settings.
Sym‐ Function
bol
"Start route flyover"
"Stop"
"Speed:"
"Next route section"
"Previous route section"
"Jump to destination"
"Jump to position"
"Points of Interest"