Advertisement
3
Hardware Installation
The associated hardware configuration is shown as following steps.
Step
1: Checking operation mode of the WF-2572
It needs to set the DIP switch to the "OP" position (operating mode). As resetting the
power, it will cause the device to operate in the operation mode.
Step 2:
Power connection
Connect the power supply to power terminator of WF-2572.
Step 3:
USB port connection
WF-2572 supports USB communication for wireless configuration. If it does not need
to modify the parameter settings, this step can be omitted.
4
Connection Application
Users can use two WF-2572s or one WF-2572 module with the computer that supports
wireless network connection structure in the application. It can complete the purpose of
wireless network connection by this way.
Ethernet
Ethernet Device
Ethernet
Ethernet Device
Technical support：service@icpdas.com
2.4/5 GHz
WF-2572
(Infrastructure mode)
WF-2572
(Infrastructure mode)
Figure 1. Application of WF-2572
Ethernet
Wi-Fi AP
Ethernet
WF-2572
(Limit-AP mode)
PC
PLC
P3
Advertisement
