If you cannot operate with the remote control
■ Operation is also possible using the
buttons on the control panel.
Control panel
■ Replacing the batteries
1
Press [POWER ON/OFF] on the control panel.
The POWER LED goes off.
2
Remove the remote control from the hanger.
(Page 14)
3
Open the cover and replace the AA
batteries.
(Page 14)
4
Mount the remote control in the hanger.
5
Press [POWER ON/OFF] on the control panel.
The POWER LED lights up.
■ If the low battery
warning LED is
fl ashing, replace the
batteries.
POWER LED
Control panel
Low battery warning LED
53