As you
leave
Note
Waiting time before cleaning the wand
after standing up
SN993MX / TCF993WA: About 70 seconds
SN992MX / TCF992WA: About 25 seconds
When the cleansing functions have
not been used in 8 hours, the wand is
cleaned automatically. (Water comes out
from near the wand cover.)
Waiting time before starting after-mist
after standing up
SN993MX/TCF993WA: About 125 seconds
SN992MX/TCF992WA: After auto wand
cleaning
The UV lamp
The following functions do not work
lights up
when the toilet seat is open.
(For about 1 hour)
SN993MX/TCF993WA: Pre-mist
SN992MX/TCF992WA: Pre-mist, after-mist
After pre-mist, water comes out from
around the wand for a few seconds.
The pre-mist does not work for about 90
sec. after some one has used it.
When the cleansing feature is not used
for about 8 hours, mist is sprayed on the
toilet bowl automatically.
The UV lamp does not light up in the
following conditions.
➝ The toilet lid is open (such as when
AUTO OPEN/CLOSE is set to "OFF")
➝ "Flush" and cleansing
When the "Flush" and cleansing
not used for about 10 hours, the UV
lamp lights up.
Lights up continuously or in a cycle
when "Auto wand cleaning", "Auto bowl
cleaning" or "Deodorizer" is operating.
(Lights up in a cycle only when the seat
has been used.)
Support Cleaning
■ CLEAN indicator
Lights to show that the "clean"
functions are operating.
Changing
settings
DEODORIZER
ON/OFF
(Page 44)
AUTO WAND
CLEAN ON/OFF
(Page 44)
−
*3
are not used
*3
are
BOWL LIGHT
ON/OFF
(Page 46)
INDICATOR
ON/OFF
(Page 46)
■ Bowl light
Lights to show that auto bowl cleaning and
auto wand cleaning are operating.
If dirt adheres...
■ If dirt adheres to the wand
during use, you can extend
the wand to clean it.
●Cleaning the wand (Page 35)
■ You can clean the toilet bowl
with water fl owing.
●Cleaning the bowl unit (Page 32)
*1 What is meant by "ewater+" ?
This water containing
hopychlorous acid generated
from chloride ions in tap water,
is widely used for cleaning and
disinfecting items such as food,
utensils and baby bottles.
Well water may not deliver the
required effect. (Because the level
of chloride ions is low.)
Clean, sterile water helps to
minimize dirty surfaces, but does
not make cleaning unnecessary.
The effect and duration vary
depending on the usage
environment and conditions.
21