Reset; Environment / Disposal - Bosch CFB 840 Servicing Instructions

20

Reset

Menu Reset is used to reset all values on the operator or
service level to the factory settings.
Exception: The timer programme remains in place.
Possible resets:
• Control unit setting
• Burner hours run
• Fault log
• Maximum exhaust gas temperature*
• Amount of heat
• Maint. message
After servicing has been completed, reset the
maintenance messages. This means that the
maintenance message no longer appears if the flap
is closed.
Resetting the maintenance message restarts the
maintenance interval. Note that with maintenance
messages set according to date, the next maintenance
date will be fixed one year in the future.
Resetting all adjustments
All values are automatically reset.
B Call up the service level.
GENERAL PARAM. appears as the first main menu.
B Turn the rotary dial until main menu Reset appears.
B Press Display briefly to call up a submenu.
Factory settings Control unit is shown as first submenu.
All settings may be lost if you press for too long.
B Press and hold button Display.
The blocks in the last line disappear one after the other. The settings
are reset when no further blocks are displayed. If the button is
released while a block is still being displayed, then the reset will be
terminated. After implementing a reset, the display automatically
reverts to the next level up.
RESET
Factory settings
Control unit
Fig. 83 Resetting all adjustments
B Press Back to terminate the reset procedure and return to the next
higher level.
CFB 840
21
Environmental protection is a fundamental corporate strategy of the
Bosch Group.
The quality of our products, their economy and environmental safety are
all of equal importance to us and all environmental protection legislation
and regulations are strictly observed.
We use the best possible technology and materials for protecting the
environment taking account of economic considerations.
Packaging
We participate in the recycling programmes of the countries in which our
products are sold to ensure optimum recycling.
All of our packaging materials are environmentally compatible and can
be recycled.
Used appliances
Used appliances contain valuable materials that should be recycled.
The various assemblies can be easily dismantled and synthetic materials
are marked accordingly. Assemblies can therefore be sorted by
composition and passed on for recycling or disposal.
6 720 802 836-105.1TL

Environment / disposal

Reset | 45
6 720 802 836 (2012/05)