Attaching the Stabilizer Plate to the System Cabinet
The stabilizer plate and mounting hardware are supplied with the 19-inch rack.
Note: To ensure the stability of the cabinet once it has been loaded, Hitachi Data
Systems recommends attaching the stabilizer plate to the rack before loading the
cabinet.
To attach the stabilizer plate to the front of the system cabinet:
1. Place the stabilizer plate up against the cabinet.
2. Align the holes from the stabilizer plate to the holes on the bottom of the cabinet.
3. Place the screws in the hole and secure them into the cabinet.
4. The stabilizer contains two holes for securing it to the ground. Suitable screws
must be used to secure the stabilizer.
8
Hitachi High-performance NAS Platform