Table of Contents
Advertisement
6. Push the connector into the mating receptacle on the charger card, and ensure it
is fully seated.
7. Arrange the connecting wires into the PSU casing so that they will not be pinched
when the access cover is reinstalled.
8. Realign the access cover with the mounting holes, and install the five countersunk
screws on the front and side of the PSU. Fasten them snugly but do not
overtighten.
9. Reinstall the pan-head screw through the rear panel of the PSU and into the
access cover. Fasten snugly.
24
Hitachi High-performance NAS Platform
Hide quick links:
Advertisement
Table of Contents
