Windows Applications - SPX Radiodetection RD7100 User Manual

WARNING! Batteries can get hot after prolonged use at full output power.
Take care while replacing or handling batteries.
WARNING! Only use charging equipment provided by Radiodetection.
The use of alternative chargers may cause a safety hazard and/or reduce
the life of the battery.
CAUTION: Do not let your battery completely discharge as this may reduce its life
or damage it permanently. If you are not using your equipment for a long period do
charge them at least once a month. If you have left your equipment stored for longer
than 1 month period and fully discharged the battery, ensure that the battery charger
indicates that it is working properly, as for its instructions, and that the battery does
not overheat.
WARNING! Batteries can get hot after prolonged use at full output power.
Take care while replacing or handling batteries.
WARNING! Do not tamper with, or attempt to disassemble the battery
packs.
CAUTION: If battery failure is suspected or if the battery shows any sign of
discoloration / physical damage return the entire unit to an authorized repair center for
investigation and repair. Local, national or IATA transport regulations may restrict the
shipment of faulty batteries. Check with your courier for restrictions and best practice
guidelines. Your local Radiodetection representative will be able to direct you to our
authorized repair centers.
NOTE: The charging temperature range is 0 to 45 °C, 32 to 113°F. Do not
attempt to recharge your batteries outside this temperature range
6
3 Year Extended Warranty
RD7100 locators and transmitters are covered by a 1 year warranty as standard.
Customers can extend their warranty period to a total of 3 years by registering
their products within 3 months of purchase.
There are 2 ways to register your product:
1. Radiodetection portal
Visit https://portal.radiodetection.com to create your portal account* and use
the Product page to register your locator or transmitter.
Visit https://support.radiodetection.com for instructions on how to create a portal
account or register your product.
* A valid email address and mobile number are required.

2. Windows Applications

RD Manager available from www.radiodetection.com/ RDManager.
™
From time to time Radiodetection may release new software to improve the
performance or add new functionality to its products. By registering, users will
benefit from email alerts advising about new software and special offers related to
its product range.
Users can opt-out at any time from receiving software and technical notifications,
or just from receiving marketing material by contacting Radiodetection.
eCert and Self-Test
The RD7100 locator is safety equipment which should be regularly checked to
ensure its correct operation.
eCert provides a thorough test of the RD7100's locating circuitry, and supplies a
Radiodetection Calibration Certificate when a positive test result is obtained.
To run an eCert, the locator should be connected to an internet-enabled PC on
which the RD Manager software is installed.
Refer to the RD Manager operation manual for further details. Additional purchase
may be required.
RD7100 locators incorporate an Enhanced Self-Test feature. In addition to the
typical checks for display and power functions, the RD7100 locator applies test
signals to its locating circuitry during a Self-Test to check accuracy and performance.
We recommend that a self-test is run at least weekly, or before each use.
7