Wan Ip Address - ActionTec Wireless-Ready User Manual

4. In the next screen, read the recommendations. To perform an advanced setup
on the Gateway, click Begin Advanced Setup.
5. The "Configuring the Advanced Settings" screen appears. To check all the set-
tings, or if unsure of which settings to modify, select Next. To modify a specif-
ic configuration, click on its name in the menu bar on the left.
Note: Click Save and Restart on the bottom left-hand side of
the screen after finishing the configuration of one or more of
the Advanced Setup settings.

WAN IP Address

Selecting Address in the "Advanced Configuration" screen generates the
WAN IP
" Address" screen.
WAN IP
of the Gateway. There are three ways to do this: Obtain an
o , Obtain an
PPP E IP
Note: Some
tion with an end user, while others use static
providers and other types of broadband Internet connections
(such as fixed point wireless) may use either
address. If unsure about which connection is present, check
with the
ISP
Actiontec Wireless-Ready DSL Gateway
Address allows manual set up of the IP address
WAN IP
Address Through
DHCP
providers use
DSL PPP
before continuing.
IP
, and Specify a Static
o to establish communica-
E
. Cable modem
IP
DHCP
24
Address through
Address.
IP
or Static
IP