ActionTec Wireless-Ready User Manual page 12

USB
Use the procedure for connecting the first computer to the Gateway via USB (see
"USB" on page xx) to connect network computers, substituting a standard, USB
cable for the purple cable. Only one computer can be connected to the Gateway
via USB.
Wireless
Note: Computers to be added to the network wirelessly must have
wireless capabilities (
etc.).
1. Insert an Actiontec Wireless Adapter
Card slots.
2. Confirm the Wireless
3. To connect your wireless client (computer with wireless capabilities) to the
Gateway, enter the following in the wireless client's settings:
Network name (SSID): ACTIONTEC
Encryption: None, or disabled
Refer to the documentation that came with the wireless adapter for more
information on how to set the Network name (SSID) and encryption.
The computer is now connected to the network wirelessly.
Chapter 2 Connecting the Gateway
wireless adapter,
PCI
Card into the upper slot of the Gateway's
PC
is glowing solid green.
LED
9
wireless adapter,
USB
PC