ActionTec Wireless-Ready User Manual page 21

4. Complete the two steps listed in the "Basic Setup" screen, then click Next.
6. Enter the User Name and Password provided by the ISP in the "DSL
Broadband Connection - PPPoE" screen. Click Next.
☞
Note: If the ISP uses a connection method other than PPPoE
(DHCP or Static IP, for example) see "Advanced Setup" to con-
nect the Gateway.
7. Click Save and Restart in the "Save and Restart" screen.
8. The "Congratulations" screen appears. The Gateway is successfully configured.
Actiontec Wireless-Ready DSL Gateway
18