ActionTec Wireless-Ready User Manual page 29

Obtain an IP Through DHCP
Select this option (used for cable modem configurations without a Static
assigned by an ) to allow the modem to query the
ISP
routing information. Some
Name and/or Domain Name. If this is the case, check with the
and domain name and enter them in the "Broadband Connection via
screen. If the does not require these settings, leave the text boxes blank.
ISP
Note: Host and domain name information may also be accessed
from the computer originally connected to the cable modem.
Specify a Static IP Address
Select this option if assigned a static (specific)
Address, along with the Subnet Mask and Default Gateway Address (also pro-
vided by the ), in the "Broadband Connection via Static
ISP
required to provide a Host Name and Domain Name, enter them here as well.
Actiontec Wireless-Ready DSL Gateway
s need to authenticate their end users with a Host
ISP
and receive
ISP
Address by the ISP. Enter the
IP
IP
26
IP
address and
IP
for a host name
ISP
"
DHCP
IP
Address" screen. If