ActionTec Wireless-Ready User Manual page 9

2. Plug the loose end of the Yellow Cable into the Ethernet Port on the back of
the computer.
3. Confirm that one of the four Ethernet Network Lights on the DSL Gateway
is green (this may take a few moments).
Note: If none of the Ethernet Network Lights glows green,
check the Yellow Cable and ensure it has been connected prop-
erly.
USB
1. Get the Purple Cable from the Purple Bag and plug one end of the Purple
Cable into the Purple Port on the back of the Gateway.
Actiontec Wireless-Ready DSL Gateway
6