ActionTec Wireless-Ready User Manual page 28

Chapter 6 Advanced Configuration
After selecting a connection type, click Next to continue configuring the connection.
Obtain an IP Address through PPPoE or PPPoA
Select this option to allow the Gateway to use the Point-to-Point over Ethernet
( ) or Point-to-Point over ( ) protocol.
PPPoE ATM PPPoA
If a User Name and Password was entered during Basic Setup, it should be dis-
played in the "Broadband Connection via " screen. If not, enter the
PPPoE/PPPoA
information now. If the information is unavailable, contact the .
ISP
25