Programming For An External Controller - Aquacal TropiCool TC500 Installation Manual

1.5.h Programming for an External Controller
Configure chiller for external control.
Using JAO interface
Press "Up" and
"Down" buttons
simultaneously until
CF1 appears.
Press the "Pool /
Spa" button until
JAO is displayed.
Using FS2 interface
Press "Up" and
"Down" buttons
simultaneously until
CF1 appears.
Press the "Pool /
Spa" button until
FS2 is displayed.
Page - 19
Press "Pool / Spa"
button until LOC is
displayed.
Press "Up" or
"Down" button.
"0" - none
l
"2" - two-wire
l
"3" - three-wire
l
Press "Pool / Spa"
button until LOC is
displayed.
Press "Up" or
"Down" to
passcode. Default is
"17".
Press "Up" or
"Down" to
passcode. Default is
"17".
Press "Pool / Spa"
button once.
Press "Pool / Spa"
button once.