Enter Service Level Programming - Aquacal TropiCool TC500 Installation Manual

1.6.b Enter Service Level Programming
Press "Up" and
"Down" buttons
simultaneously until
CF1 appears.
Programming for a Relay Switch
Configure chiller for a relay or flow switch. This can provide automatic pool/ spa thermostat switching.
Press "Up" and
"Down" buttons
simultaneously until
CF1 appears.
Press the "Pool /
Spa" button until
FS2 is displayed.
PLEASE NOTE -
Once the FS2 feature has been activated the "POOL / SPA" button will no longer function.
The relay or flow switch is used to change between the pool and spa temperature settings.
Press "Pool / Spa"
button until LOC is
displayed.
Press "Pool / Spa"
button until LOC is
displayed.
Press the "Up" or
"Down"
"0" - not active
l
"1" - enable
l
Press "Up" or
"Down" to
passcode. Default is
"17".
Press "Up" or
"Down" to
passcode. Default is
"17".
Press "Pool / Spa"
button once.
Press "Pool / Spa"
button once.
Page - 22