Set The Fan Speed - A.O. Smith TWI 35-200 Installation, User And Service Manual

10.9.2
n
0313279_TWISTER II_UKUK_V1.1, 18-02-2019

Set the fan speed

To change the fan speed:
1. From the Service Menu submenu open the Blower RPM control screen.
Fig. Blower RPM control screen
Blower RPM
Max
MIN
MIN
ACCEPT
2. Use [+] and [-] to change the blower RPM setting.
3. Press [ACCEPT] to confirm the value or press [BACK] to return to the previous
screen.
The fan will now operate according to the new setting.
Note
The fan will reduce speed when going from Full Load (MAX) to Partial Load (MIN) and will
gain speed when going from Partial Load (MIN) to Full Load (MAX).
MAX
MAX
BACK
65