Use; Turn On The Water Heater; Set The Water Temperature - A.O. Smith DRE PLUS Installation, User And Service Manual

4
4.1
c
4.1.1
c
0313853_DRE PLUS_ENNLFR_V3.0, 20-06-2023

Use

Turn on the water heater

Caution
Make sure that the water heater is filled with water before you turn on the water heater.
Switch the isolator between the water heater and the mains power supply on to start the
water heater.

Set the water temperature

Caution
Preferably set the temperature setpoint to 60 ºC. Harmful scaling and lime build–up will
be higher when you set the temperature setpoint to 65 ºC and higher. At lower
temperature settings there is a higher risk of high legionella concentrations in the water.
To change the temperature setpoint:
1. Press [Menu] to access the main menu.
EN
23