Honeywell FE260 Operating Instructions Manual page 24

22
Alternative depiction „Status FE260 / Call acceptance window / Modem
Status
FE260 /
call acceptance windows /
modem
FE260 off
Switch on FE260, both call acceptance windows 5 + 6 closed
Modem unregistered
Switch on FE260, both call acceptance windows 5 + 6 closed
Modem registered
Open one of the call acceptance windows 5 or 6 during the FE260 is switched on
During registering
Registered to GSM network,
no GPRS session,
no CSD connection
incoming CSD-Call
Registered to GSM network,
no GPRS session,
CSD connection active
no data transmission
Registered to GSM network,
no GPRS session,
CSD connection active
during CSD data transmission
Registered to GSM network,
GPRS session active,
no CSD connection,
no TCP connection
Incoming TCP-Call
(establish TCP socket)
Registered to GSM network,
GPRS session active,
TCP socket connection active,
no data transmission
Registered to GSM network,
GPRS session active,
TCP socket connection active,
during TCP data transmission
1
Because the FE260 is always supplied by mains, typically one of the call acceptance windows 5 or 6 is always open.
Flashes invers to LED1 „GSM"
2
„Single" flashing (100ms on, 2s off) → Modem registered to the 2G home network
3
„Double" flashing (100ms on, 100ms off, 100ms on, 2s off) → Registered, 2G roaming
„Double" flashing, fast (50ms on, 50ms off, 50ms on, 2s off) → Registered, 3G home network
Fast continuous flashing
4
Off until the PIN is entered, then on
Flashes 1x for each ring tone (according menü item „Serv. – interface – Clamp interface. – Num.T", in case off
5
GSM/GPRS and UMTS modem typically Num.T=2)
6
Flashes 1x shortly
Operating Manual
On the lid of the
FE260
Power Online
off off
on on
2
on flashs
→ Modem registers
on flickers
GSM operation (no APN data entered)
flashs
on
26
on off
on on
on on
GPRS operation (valid APN data entered)
flashs
on
26
flashs
on
26
on on
on on
(50ms on, 50ms off, 50ms on, 100ms off) → Registered, 3G roaming
→
LED stati":
Status of the light-emitting diodes
On the GSM/GPRS or UMTS modem module
LED1 LED2 LED3
GSM GPRS DCD
off off off
, PIN active → Modem remains unregistered
1
off off off
, PIN inactive → Modem registers automatically
25
3
flashs off off
4
off /on off off
27
flashs off off
on off off
on off on
on off on
27
flashs on off
27
flashs on off
on on on
on on on
FE260
LED4 LED5 LED6
Ri TxD RxD
off off off
off off off
off off off
off flickers flickers
off off off
5
flashs off off
off off off
off flickers flickers
off off off
6
flashs off off
off off off
off flickers flickers