Other Operations - Sony MHC-S90D Operating Instructions Manual

Playing a disc (continued)

Other operations

To Do this
Stop playback
Press x (DVD/VIDEO CD/
CD). The playback stops at the
point x is pressed (Resume
Play). Press x again to cancel
the Resume Play (see page 30).
Pause playback Press X
Press again to resume playback.
Select a track or During playback or pause, press
chapter > (or NEXT) (DVD/VIDEO
CD/CD) to go forward or .
(or PREV) (DVD/VIDEO CD/
CD) to go backward.
Find a point in Press M or m (DVD/VIDEO
a track title or
CD/CD) during playback. Each
chapter
time you press the button, the
(Lock
speed changes as follows:
Search function) 1 (slow) y 2 (faster than 1)
Press N SELECT to stop
searching at the desired point.
Change the During playback, press SLOW
*2
playback speed t or T
(Slow-motion play) time you press the button, the
speed switches between two
slowed playback speeds. To
return to normal playback, press
N SELECT.
Playing the disc
During playback, press STEP
frame by frame c or C
changing the
Each time you press the button,
playback speed *2
playback is advanced a single
(Freeze Frame) frame in the desired direction.
To return to normal playback,
press N SELECT.
Select a disc when Press one of the DISC 1–3
playback is stopped buttons (or D.SKIP on the
remote).
Switch to DVD Press one of the DISC 1–3
function from buttons (Automatic Source
another source Selection).
Remove the disc Press one of the DISC 1–3 Z
buttons.
26
*1
.
*3
on the remote. Each
*3
on the remote.
*1
There may be some disturbance in the video
image.
*2
DVD and VIDEO CD only.
*3 SLOW t and STEP c are not available during
playback of VIDEO CDs.
Notes
• Depending on the DVD or VIDEO CD, some
operations may be prohibited.
• VIDEO CDs cannot be viewed slowly or frame by
frame in the reverse direction.
• Under the following circumstances, the sound field
is automatically set to "2CH STEREO".
– When recording.
– When TAPE B is in REC PAUSE mode.
– When recording using TAPE B.
• When using headphones, the sound from
headphones is 2 channel.
• Switch the sound field to "2CH STEREO" when
making an analog recording using a component
connected to the MD OUT jacks on this unit. There
is no audio output from the MD OUT jacks in the
multi channel mode.
• Depending on the DVD, digital recording may not
be done. In this case, perform analog recording.
Turn FILE SELECT to select "2CH STEREO"
when making an analog recording.
• Set the sound to "STEREO" using the AUDIO
button when you play DTS sound tracks on a CD
(page 34).
MHC-S90D 4-235-983-13(2) GB