Tape; Loading A Tape; Playing A Tape - Sony MHC-S90D Operating Instructions Manual

Tape

Loading a tape

1
Press Z (Deck A or B).
2
Insert a tape in deck A or B.
Insert with the
side you want
to play/record
facing forward.

Playing a tape

You can use TYPE I (normal), TYPE II (CrO
or TYPE IV (metal) tapes. The deck
automatically detects the tape type.
1
Load a tape.
2
Press DIRECTION repeatedly to select
g to play one side, j to play both
sides, or RELAY* (Relay Play) to play
both decks in succession.
3
Press N (Deck A or B) (or, TAPE A
nN or TAPE B nN on the remote).
The tape starts playing.
Press n (Deck A or B) to play the reverse
side. When using the remote, press TAPE A
nN or TAPE B nN again.
When you select j or RELAY, the deck
stops automatically after repeating the
sequence 5 times.
* Relay Play always follow this cyclic sequence:
Deck A (front side) t Deck A (reverse side) t
Deck B (front side) t Deck B (reverse side)
To
Stop playback
Fast-forward or rewind
Remove the cassette
44
M >
m
.
h H H
AUTO REVERSE
h
x
A
),
2
Do this
Press x (Deck A or B).
Press m or M (Deck A
or B) when the playback is
stopped.
Press Z (Deck A or B).
Tip
When you want to reduce the hiss noise in low-level
high-frequency signals, press DOLBY NR so that
"DOLBY NR" appears in the display.
Searching for the beginning of a
track (AMS*)
During playback, press . or > (Deck A
or B) repeatedly for the number of songs you
want to skip forward (or backward).
The search direction, + (forward) or – (back),
and number of songs being skipped (1–9)
appear in the display.
Example: searching forward 2 songs
* Automatic Music Sensor
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– When the unit is placed near a television.
MHC-S90D 4-235-983-13(2) GB