Setting The Time; Saving The Power In Standby Mode - Sony MHC-S90D Operating Instructions Manual

Setting the time

1
Turn on the system.
2
Press CLOCK/TIMER (or CLOCK/TIMER
SET on the remote).
When you set the time for the first time,
proceed to step 5.
3
Press O or o repeatedly to select
"CLOCK SET".
4
Press ENTER (A/V amplifier or remote).
5
Press O or o repeatedly to set the hour.
6
Press ENTER (A/V amplifier or remote).
7
Press O or o repeatedly to set the
minutes.
8
Press ENTER (A/V amplifier or remote).
Tip
If you have made a mistake or want to change the
time, start over from step 2.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Saving the power in
standby mode
Press DISPLAY repeatedly when the
power is off.
Each time you press the button, the system
switches cyclically as follows:
Demonstration t Clock display t Power
Saving Mode
To cancel the Power Saving Mode
Press DISPLAY once to show the
demonstration, twice to show the clock display.
Tips
• ?/1 indicator lights up even in the Power Saving
Mode.
• The timer functions during the Power Saving Mode.
Note
During the Power Saving Mode, the following
functions do not work:
– Setting the time.
– Changing the AM tuning interval (European and
Middle Eastern models do not have this function).
– One Touch Play function.
MHC-S90D 4-235-983-13(2) GB
17