Microphone - Cisco SX80 User Manual

Tap Camera to access the
camera menu .
Tap the little arrowhead of
the preset to be edited .
The SX80 with Touch 10 is set up with three (3) Standard Presets: Camera presets will be set up and
saved as part of equipment implementation but there may be a need to change or resave presets .
Sign – shows the site's sign with their site name. This is an off screen camera view that allows
users to move about the room without being on camera and identifies the sites that are
connected .
Participant (Presenter/Provider/Patient) – close up view of the person or persons involved in the
event . Whether it is the patient, provider or a presenter, when setting this preset, you want to
ensure that the far sites are able see the person clearly .
Room –shows a view of everyone in the room . By setting a preset of the entire room, you can
easily identify everyone in attendance and then switch back to the participant preset as
necessary . This preset is also helpful for question and answer periods .

Microphone

MBTelehealth - SX80 with Touchpad10 User Guide
Modify Existing Preset
Tap the preset to be edited . Selfview
will be activated automatically .
Tap Update to Current Position .
to put your changes into effect.
To delete an existing preset tap Remove.
Standard Presets
Mute and Unmute the Microphone
Mute and unmute the microphone .
Green
Red
Unmuted (site can hear you)
Mute (site cannot hear you)
Use the arrows and zoom
+/- to adjust the camera .
Tap anywhere outside the
menu to close it .
Page 8 of 19