Related Manuals for netvox R718DB
Summary of Contents for netvox R718DB
-
Page 1: User Manual
R718DB Model： Wireless Vibration Sensor(Spring Type) Wireless Vibration Sensor (Spring Type) R718DB User Manual... -
Page 2: Table Of Contents
Table of Content 1. Introduction ................................2 2. Appearance ................................3 3. Main Features ................................3 4.Set up Instruction ..............................4 4.1 Power on and Turn on / off ..........................4 4.2 Join Into Lora Network ..........................4 4.3 Function Key ..............................4 4.4 Data Report .............................. -
Page 3: Introduction
Introduction R718DB is a long-range wireless spring-loaded vibration device for Netvox ClassA-type devices based on the LoRaWAN open protocol and is compatible with the LoRaWAN protocol. LoRa Wireless Technology: LoRa is a wireless communication technology dedicated to long distance and low power consumption. -
Page 4: Appearance
2. Appearance Fig.1 R718DB Appearance 3. Main Features ⚫ Compatible with LoRa protocol. ⚫ 2 x 3.6V ER14505 AA lithium batteries（3.6V/section） ⚫ Detectable Object Vibration ⚫ Simple Setting and Installation... -
Page 5: Set Up Instruction
The network operation is as following: (1) If R718DB had never joined any network, turn on the device; it will search an available LoRa network to join. The green indicator will stay on for 5 seconds to show that it joins into the network, otherwise, the green indicator does not work. -
Page 6: Restore To Factory Setting
1. Press and hold function key for 5 seconds till the green indicator flashes and then release; LED flashes quickly 20 times. 2. R718DB will be at off mode by default setting after restoring to factory setting. Press function key to turn on R718DB and to join a new LoRa network. -
Page 7: Low Voltage Alarming
If it’s at (B) status, to prevent this unwanted power consumption, we recommend that users remove the batteries to power off the device. 7. Low Voltage Alarming The operating voltage threshold is 3.2V. If the voltage is lower than 3.2V, R718DB will send a low-power report to the Lora network. 8. Installation This product comes with waterproof function. - Page 8 also explode. All of the above suggestions apply equally to your device, battery and accessories. If any device is not working properly. Please take it to the nearest authorized service facility for repair.