Emerson Rosemount 5300 Series Quick Start Manual page 30

Quick Start Guide
2. WARNING – The apparatus enclosure contains aluminum and is
considered to constitute a potential risk of ignition by impact or
friction. Care must be taken into account during installation and use to
prevent impact or friction.
9.5.2 I5 Intrinsic Safety (IS), Nonincendive (NI)
Certificate FM16US0444X
Standards FM Class 3600 – 2011; FM Class 3610 – 2010; FM Class 3611 –
Markings
Special Conditions for Safe Use (X):
1. WARNING –Potential Electrostatic Charging Hazard – The enclosure
contains non-metallic material. To prevent the risk for electrostatic
sparking the plastic surface should only be cleaned with a damp cloth.
2. WARNING – The apparatus enclosure contains aluminum and is
considered to constitute a potential risk of ignition by impact or
friction. Care must be taken into account during installation and use to
prevent impact or friction.
Entity parameters
HART
Entity parameters
Fieldbus
9.5.3 IE FISCO
Certificate FM16US0444X
Standards FM Class 3600 – 2011; FM Class 3610 – 2010; FM Class 3611 –
Markings
30
2004; FM Class 3615 – 2006; FM Class 3810 – 2005; ANSI/ISA
60079-0 – 2013; ANSI/ISA 60079-11 – 2012; ANSI/NEMA 250 –
2003;
IS CL I, II, III, DIV 1, GP A, B, C, D, E, F, G in accordance with
control drawing 9240030-936; IS (Entity) CL I, Zone 0, AEx ia IIC
T4 in accordance with control drawing 9240030-936, NI CL I, II,
III DIV 2, GP A, B, C, D, F, G; T4; -50 °C ≤ Ta ≤ 60 °C / 70 °C; Type
4X
Ui
30 V
30 V
2004; FM Class 3615 – 2006; FM Class 3810 – 2005; ANSI/ISA
60079-0 – 2013; ANSI/ISA 60079-11 – 2012; ANSI/NEMA 250 –
2003;
IS CL I, II, III, DIV 1, GP A, B, C, D, E, F, G; T4; in accordance with
control drawing 9240030-936; IS CL I, Zone 0 AEx ia IIC T4 in
Ii Pi
130 mA 1 W
300 mA 1.3 W
Rosemount 5300 Level Transmitter
February 2019
Ci Li
7.26 nF 0
0 0