Certificates And Approvals - Endress+Hauser Cerabar T PMP 13 Technical Information

Cerabar T PMP 135
Ex approval
CE mark
Pressure equipment
directive
Endress+Hauser
Instructions for switch point and hysteresis
U = output voltage
out
p = acting pressure
– The percentages refer to the measuring range.

Certificates and approvals

•
ATEX II 1/2 G EEx ib IIC T6
•
ATEX II 2 G EEx ib IIC T6
•
ATEX II 3 G EEx nA II T6
The device meets the legal requirements of the EC directives. Endress+Hauser confirms that the
device has been successfully tested by applying the CE mark.
This device conforms to Article 3 (3) of EC Directive 97/23/EC (pressure equipment directive) and
is developed and produced in sound engineering practice.
P01-PMP13xxx-05-xx-xx-en-001
9