Cerabar T PMP 135
Process connections
Material
Endress+Hauser
➀ Clamp ½"...¾" (ISO 2852) or DN 10...DN 20 (DIN 32676)
➁ Clamp 1"...1½" (ISO 2852) or DN 25...DN 40 (DIN 32676)
➂ Clamp 2" (ISO 2852) or DN 50 (DIN 32676)
➃ G 1A (ISO 228), with metallic sealing taper
➄ G 1A (ISO 228), with sealing surface for flush-mounted installation
➅ SMS 1½"
M = diaphragm diameter of 17.2 mm
* Height dimension A (see previous section)
(all dimensions in mm / 25.4 mm = 1 in)
•
Process connection and diaphragm: AISI 316L
Surfaces in contact with the process with surface quality R
•
Transducer housing: AISI 304
•
Plug: polyamide (PA)
•
Cable outer covering: polyurethane (PUR)
•
Fill fluid: Neobee M20 (FDA-no. 21CFR172.856)
P01-PMP135xx-06-xx-xx-xx-001
≤ 0.8 µm
a
7