Power-Off; Hard Reset - DirecTV Advanced Installation Meter 2 Operation Manual

Power-Off

Press and hold the POWER button until the SHUT DOWN AIM screen appears.
Use the up/down arrow buttons to highlight Shutdown and press OK.

Hard Reset

If the AIM is unresponsive to button presses, perform a hard reset.
Press and hold the POWER button for 10 to 30 seconds until the meter turns off.
Wait for several seconds, then press the POWER button again. The meter should turn back
on.
If the AIM does not turn on after a hard reset, connect the AIM
to the AC power adapter (see the Battery Charging section
later in this chapter), then press the POWER button.
If the meter still does not turn on, return the AIM to Trilithic
Customer Service. See the Return Policy section later in the
manual.
The meter turns off.
AIM 2 Operation Manual
Page 19