Table of Contents
Advertisement
Transferring records from a USB flash drive to the AIM
1. Insert the USB flash drive in the appropriate
USB connector on the meter.
2. Press CONFIG to go to the
CONFIGURATION screen.
3. Highlight Records and press SELECT to go
to the RECORDS MAIN screen.
4. Highlight Transfer Records from USB and
press SELECT to go to the TRANSFER
RECORDS FROM USB screen. Then
highlight one of the following options:
•
To copy an individual record, highlight
Select Individual Record and press
SELECT. Highlight the record to copy
and press SELECT.
•
To copy all records from the USB
drive, highlight Copy All Records
and press SELECT.
•
To copy all records of a selected type
from the USB drive, highlight the
type of records to copy and press
SELECT.
5. On the message that appears to confirm your transfer, press OK.
6. The records are transferred to the AIM, and the RECORDS MAIN or TRANSFER
RECORDS FROM USB screen appears.
You also can view, move, or delete an individual record from
the Options screen. Press OPTIONS, highlight the desired
option, and press OK.
AIM 2 Operation Manual
Page 103
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Advanced Installation Meter 2 and is the answer not in the manual?
Questions and answers