Bostitch N89RH17-2 Technical Data Manual page 6

© BOSTITCH 2019
m Warning!
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
• IMPORTANT SAFETY INFORMATION ENCLOSED.
compliance for the products.
• READ THIS MANUAL BEFORE OPERATING THE TOOL.
GB
• SAVE FOR FUTURE REFERENCE.
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
• FAILURE TO OBSERVE THE FOLLOWING
rien que les produits soient conformes aux normes CE.
WARNINGS COULD RESULT IN INJURY.
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
die CE-Richtlinien für Produkte. • Do not use damaged, frayed or
deteriorated air hoses and fittings.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
zeggen dat de producten voldoen aan de CE-vereisten.
• Air powered tools can vibrate in use.
Vibration, repetitive motions or
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for uncomfortable positions may be harmful
to your hands and arms. Stop using any
produkterne.
machine if discomfort, tingling feeling
or pain occurs. Seek medical advice
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
before resuming use.
yhdenmukaisuutta.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα
• Do not carry the tool by the hose.
αντίγραφα του παρόντος εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
• Keep body stance balanced and firm.
conformità CE per i relativi prodotti.
Do not overreach when operating this tool.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for
• Always turn off the air supply and
CE-merking for produktet.
disconnect the air supply hose before
installing, removing or adjusting any
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
accessory on this tool, or before
performing any maintenance on this tool.
conformidade com a CE para os produtos.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
conformidad con las normas CE de los productos.
• Use protective equipment such as
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
glasses, gloves, safety shoes as well
as acoustic protection. Remain vigilant,
conformidad con las normas CE de los productos.
use common sense and pay attention
when using the machine.
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
nie stanowią deklaracji zgodności CE prezentowanych produktów.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu
• Always wear suitable CE marked
nie stanowią deklaracji zgodności CE prezentowanych produktów.
eye protection when operating or
performing maintenance on this tool.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
výrobky.
• Operate at no more than the tool's
maximum pressure stated in column
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem
MAX
"I" of the technical data table.
PSI
jelenti a termék CE-megfelelőségét.
• Do not over-oil and do not use heavy
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
grade oil as stalling and low
performance may result.
conformitatea CE pentru produse.
m This tool is intended to be used for fastening wood
to wood in pallet/crate and construction applications.
DO NOT USE for fastening harder materials which could
cause buckling of the fasteners and damage to the tool.
If you are unsure of the suitability of this tool for certain
applications, please contact your local sales office.
TRIP OPERATION MODE
m WARNING! Always disconnect air supply before
making adjustments as accidental actuation may occur,
possibly causing injury.
SEQUENTIAL ACTUATION MODE:
Models: F21PL-E, F33PT-E, F33PTSM-E, F28WW-E,
N89RH17-2
SEQUENTIAL ACTUATION
The sequential actuation requires the operator to hold
the tool against the work with the safety yoke depressed
before pulling the trigger. In order to drive additional
fasteners, the trigger must be released and the tool
lifted away from the work, before repeating the above
mentioned steps.
This makes accurate fastener placement easier, for
instance on framing, toe nailing and crating applications.
The sequential actuation allows exact fastener location
without the possibility of driving a second fastener on
recoil, as described under Contact Trip (below). The
sequential actuation tool has a positive safety advantage
because it will not accidentally drive a fastener if the tool
is contacted against the work - or anything else - while
the operator is holding the trigger pulled.
FASTENER DEPTH CONTROL ADJUSTMENT (Fig 1)
The Fastener Depth Control Adjustment feature provides
control of the nail drive depth from flush with or just
above the work surface to shallow or deep countersink.
Warning! Disconnect tool from air supply before
attempting any parts disassembly and before changing
the work contacting element adjustment.
1. Push in Locking Button
2. Adjust contact arm up to increase depth of drive or
down to decrease it.
3. Release locking button.
Note: Metal Connector Attachment is not adjustable for
depth control.
DIRECTIONAL EXHAUST DEFLECTOR (Fig 2)
The adjustable exhaust deflector can be rotated into any
desired position by hand without the use of tools.