Product Return Procedure; Recycling And Disposal; Rohs Directive 2011/65/Eu (Rohs 2); Weee Directive 2012/19/Eu - EM TEST coupling NX5 bs-3-480-16 Manual

EM TEST
1.3.

Product return procedure

1. Request a Return Material Authorization (RMA) number from the local EM TEST representative
2. When requesting an RMA, have the following information ready:
- Model number
- Serial number
- Description of the problem
NOTE: Unauthorized returns will not be accepted and will be returned at the shipper's expense.
NOTE: A returned product found upon inspection by EM TEST, to be in specification is subject to an
evaluation fee and applicable freight charges.
1.4.

Recycling and Disposal

1.4.1.

RoHS directive 2011/65/EU (RoHS 2)

RoHS directive 2011/65/EU (RoHS 2)
The EM TEST compact NX5 series generator complies with the directive 2011/65/EU (RoHS - Restriction of
certain Hazardous Substances).
From December 2005, all EM TEST products either hand soldered or by machine are produced using lead-free
solder.
1.4.2.

WEEE directive 2012/19/EU

The EM TEST coupling NX series couplers are dedicated under category 9 in the directive 2012/19/EU (WEEE).
The product should be recycled through a professional organization with appropriate experience for the disposal
and recycling of electronic products. EM TEST is also available to help with questions relating to the recycling of
this equipment.
1.4.3.

Dismantling information

Always remove power cord first. There is no special danger involved in dismantling the coupling NX series.
1.4.4.

Parts which can be recycled

The NX coupling contains parts made from steel, aluminum, PVC, two-component sealing compound. The
impulse capacitors are filled with non-poisonous mineral oil. The various parts can be separated and recycled.
10.5

Parts which cannot be recycled

All parts in the coupling NX series can be recycled.
Manual of operation V 1.03
coupling NX
6 / 53