Declaration Of Ce-Conformity Coupling Network Coupling Nx5 Bs-3-690-Xx.1 - EM TEST coupling NX5 bs-3-480-16 Manual

EM TEST

12.1.4. Declaration of CE-Conformity Coupling Network coupling NX5 bs-3-690-xx.1

Manufacturer:
Address:
Declares, that under is sole responsibility, the product's listed below, including all their options, are conformity with
the applicable CE directives listed below using the relevant section of the following EC standards and other normative
documents.
Product's name:
Model Number(s)
Low Voltage Directive 2014/35/EU
Standard to which conformity is declared:
EN 61010-1:2011
EMC Directive 2014/30/EU
Standard(s) to which conformity is declared:
EN 61326-1:2013
EN 61000-3-2:2014
EN 61000-3-3:2013
The purpose of this instrument is the generation of defined interferences signals for EMI immunity testing.
Depending on the arrangement of the test rig, the configuration, the cabling and the properties of the EUT itself, a
significant amount of electromagnetic radiation may result that could also affect other equipment and systems.
The user himself or herself is ultimately responsible for the correct and controlled operation of the rig. In case of
doubt, the tests should be carried out in a Faraday cage.
By
Place
Date
Manual of operation
EM TEST (Switzerland) GmbH
Sternenhofstr. 15
CH 4153 Reinach
Switzerland
Test Rack including coupling / decoupling network
coupling NX5 bs-3-690-63.1
coupling NX5 bs-3-690-125.1
coupling NX5 bs-3-690-200.1
Safety requirements for electrical equipment for measurement, control, and
laboratory use.
Electrical equipment for measurement, control and laboratory use
(Requirements for devices to use in industrial area.)
Limits for harmonic current emissions
Limitation of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems.
European representative
AMETEK CTS Germany GmbH
Lünenerstr. 211
D 59174 Kamen
Tel: +49 (0) 2307 / 26070-0
Fax: +49 (0)2307 / 17050
A. Gerstner
General manager
Kamen, Germany
12. December 2016
V 1.03
Manufacturer
EM TEST (Switzerland) GmbH
Sternenhofstr. 15
CH 4153 Reinach
Tel: +41 61-7179191
Fax: +41 61-7179199
A. Burger
Design and Research
Reinach BL, Switzerland
25. February 2016
coupling NX
41 / 53