Huawei OceanStor V3 Series Features Manual page 85

OceanStor V3 Series
Remote Replication Feature Guide for Block
Figure 4-3 Configuration roadmap
Enable the remote
replication feature.
Create a secondary LUN
in the storage system at
site B.
Set up a logical
connection between sites
A and B.
Create an asynchronous
remote replication
session in the primary
storage system at site A.
Table 4-6
example.
Issue 06 (2018-01-30)
Check the license files.
Create a disk domain.
Create a storage pool.
Create a secondary LUN.
Configure host port IP
Add a remote device.
Create an asynchronous
remote replication session.
lists the configuration operations and planning items involved in the configuration
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Start
Make sure that the license files of
storage systems at sites A and B
grant the permission for
asynchronous remote replication.
addresses.
If you want to connect the two storage
systems at the two sites through iSCSI
host ports and the host ports of the two
storage systems are in different network
Add routes.
segments, add a route for each storage
system.
After a logical connection is set up
between the two storage systems, create
an asynchronous remote replication
session in the storage system at site A.
End
4 Configuration Example
In the storage system at site B, create
a secondary LUN of the same size as
the primary LUN at site A.
Note: Mandatory Optional
77