Huawei OceanStor V3 Series Features Manual page 117

OceanStor V3 Series
Remote Replication Feature Guide for Block
Precautions
The properties of the remote replication pair that has been added into the consistency group
cannot be modified.
After the remote replication pair has been added into the consistency group, the remote replication pair will
function according to the replication properties of the consistency group (the properties are Recovery Policy,
Data Transmission, Speed, Synchronization Method, and Interval), and is not relevant to the properties of
the pair.
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose
Step 3 Select the remote replication pair you want to modify and click Properties.
The Properties of Remote Replication Pair dialog box is displayed.
Step 4 Modify properties of the remote replication pair.
Table 6-3 Remote replication parameters
Parameter
Status of Secondary
Resource
Protection
Issue 06 (2018-01-30)
NOTE
Data Protection >
Description
The status of secondary resource
protection includes:
l Read-only: Data of the secondary
l Read/Write: Data of the secondary
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Remote Replication > Remote Replication Pair.
Table 6-3
LUN is only readable.
LUN is readable and writable.
6 Managing Remote Replication
describes related parameters.
Value
[Example]
Read-only
NOTE
You can set the
secondary resource
protection data status in
the following
conditions:
l Pair Running
Status is Split,
Secondary
Resource Data
Status is
Consistent.
l Pair Running
Status is
Interrupted (link
down), Secondary
Resource Data
Status is
Consistent. In this
condition, the status
can only be set in
the secondary
storage system.
109