Huawei OceanStor V3 Series Features Manual page 126

OceanStor V3 Series
Remote Replication Feature Guide for Block
Procedure
Step 1 Log in to DeviceManager.
Step 2 Choose
Step 3 In the remote replication list, select a remote replication pair that can be deleted.
Step 4 Delete the selected pair.
1.
2.
Step 5 Confirm the remote replication deletion.
1.
Issue 06 (2018-01-30)
Data Protection >
Click Delete.
The security alert dialog box is displayed.
In the security alert dialog box, select Only delete the configuration information
about the local device if the local device is disconnected from the remote device and
Forcibly ensure data consistency for the secondary resource based on your needs.
Table 6-7 describes the parameters.
Table 6-7 Parameters for deleting remote replication
Parameter
Only delete the configuration information
about the local device if the local device
is disconnected from the remote device
Forcibly ensure data consistency for the
secondary resource
Confirm the information in the dialog box. Select I have read and understand the
consequences associated with performing this operation. and click OK.
The Execution Result dialog box is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Remote Replication > Remote Replication Pair.
Description
This option is applicable to scenarios
where the physical link between the local
storage system and remote storage system
is disconnected. In such scenarios, this
option is mandatory. Otherwise, the pair
cannot be deleted.
If you want to delete the configuration
information of remote replication from
the remote storage system, you must
perform this operation in the remote
storage system.
NOTE
If the physical link is normal, do not select
this option.
If the secondary resource data is
inconsistent and the initial
synchronization completes, the secondary
resource will execute snapshot rollback to
ensure data consistency. If the initial
synchronization does not complete, the
secondary resource data may not be
consistent. You are advised to manually
clear the resource.
6 Managing Remote Replication
118