Huawei OceanStor V3 Series Features Manual page 137

OceanStor V3 Series
Remote Replication Feature Guide for Block
Parameter
Pair Health Status
Pair Running Status
Time Remaining for Synchronization
Remote Replication Consistency Group
Issue 06 (2018-01-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Managing Consistency Groups
Description
Indicates whether the remote replication
pair is functioning normally. The values
include:
l Normal: The pair is functioning
normally. You can perform the
synchronization operation.
l Fault: The pair malfunctions or the
replication link is down, you cannot
perform the synchronization operation.
Indicates whether the remote replication
pair is running properly. The values include:
l Normal: Pair has completed
synchronization successfully.
l Synchronizing: Pair is synchronizing
data.
l Split: Pair is in the split status, and the
synchronization is suspended.
l Interrupted: The remote replication
internal I/O error or the replication link
is down, and you cannot perform the
synchronization operation temporarily.
l To be recovered: After the remote
replication internal I/O error is rectified
or the replication link is up, and if
Recovery Policy is Manual, the pair
enters this status. You need to manually
start synchronization for the pair to
synchronize data.
l Invalid: The pair is useless and cannot
be restored in this status, except deleting
it. You must delete the pair on both
primary and secondary storage devices.
Otherwise, the pair creation may fail.
NOTE
When the running status of a remote replication
repair is Synchronizing, the progress bar is
displayed on the GUI to indicate the current
synchronization progress. The progress may
suddenly change, which is a normal
phenomenon.
Time required for synchronization to
complete.
NOTE
This parameter is not supported in
V300R006C00.
Name of the owning consistency group of
the remote replication.
129