Seco SM-C12 User Manual page 33

SMB_ALERT_1V8#: SM Bus Alert# (interrupt) signal. Input, +1.8V_S electrical level
3.2.1.17 Boot Select
The following signals are active low and driven by open drain circuitry on the carrier board.
BOOT_SEL0#: Boot Device Selection #0. Input, +1.8V_S electrical level with a 10kΩ pull-up resistor
BOOT_SEL1#: Boot Device Selection #1. Input, +1.8V_S electrical level with a 10kΩ pull-up resistor
BOOT_SEL2#: Boot Device Selection #2. Input, +1.8V_S electrical level with a 10kΩ pull-up resistor
FORCE_RECOV#: Force recovery Mode. Input, +1.8V_S electrical level with a 10kΩ pull-up resistor
SM-C12
SM-C12 User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Authors: S.B. and L.G - Reviewed by N.P. - Copyright © 2019 SECO S.p.A.
33