Accessories - ABB TB404 Operating Instruction

INTRODUCTION

ACCESSORIES

Accessory
4TB3004-0008 Interconnecting cable, Teflon®* jacketed, 6-conductor, sensor to conductivity instrument
4TB4711-0021 Retaining nut for in-line flow assembly
4TB4906-0014 Viton gasket for in-line flow assembly
4TB4951-0092 Submersible coupling adapter (
4TB4951-0093 Submersible coupling adapter (
4TB4951-0094 Submersible coupling adapter (
4TB5110-0067 Conduit/cable gland adapter for in-line flow assembly, ¾ in.
4TB5205-0285 Full port ball valve, 1-½ in., 316 stainless steel
4TB8006-0025 High temperature silicone grease
4TB8006-0045 Anti-seize compound
4TB9515-0065 Hardware kit for high pressure hot tap assembly with Titanium hardware and EPDM hard-
ware O-rings (Nos. 014 and 132)
4TB9515-0066 Hardware kit for high pressure hot tap assembly with Titanium hardware and Viton hard-
ware O-rings (Nos. 014 and 132)
4TB9515-0067 Hardware kit for high pressure hot tap assembly with Titanium hardware and Kalrez hard-
ware O-rings (Nos. 014 and 132)
4TB9515-0069 Hardware kit for high pressure hot tap assembly with 316 stainless steel hardware and
EPDM hardware O-rings (Nos. 014 and 132)
4TB9515-0070 Hardware kit for high pressure hot tap assembly with 316 stainless steel hardware, EPDM
hardware O-rings (Nos. 014 and 132) and ball valve
4TB9515-0071 Hardware kit for high pressure hot tap assembly with 316 stainless steel hardware and
Viton hardware O-rings (Nos. 014 and 132)
4TB9515-0072 Hardware kit for high pressure hot tap assembly with 316 stainless steel hardware, Viton
hardware O-rings (Nos. 014 and 132) and ball valve
4TB9515-0073 Hardware kit for high pressure hot tap assembly with 316 stainless steel hardware and
Kalrez hardware O-rings (Nos. 014 and 132)
4TB9515-0074 Hardware kit for high pressure hot tap assembly with 316 stainless steel hardware, Kalrez
hardware O-rings (Nos. 014 and 132) and ball valve
4TB9515-0104 In-line fitting for in-line flow assembly, 1-½ in., 316 stainless steel
4TB9515-0105 In-line fitting for in-line flow assembly, 1-½ in., Titanium
4TB9515-0106 In-line fitting for in-line flow assembly, 1-½ in., CPVC
4TB9515-0107 Sensor O-ring kit (No. 117), EPDM
4TB9515-0108 Sensor O-ring kit (No. 117), Viton
4TB9515-0109 Sensor O-ring kit (No. 117), Kalrez
NOTE:
1. Most accessories are available as nomenclature options or come installed with sensor assemblies. Refer to Table 1-2.
* TEFLON® is a registered trademark of DuPont.
ACCESSORIES
1 - 6
Table 1-4 lists the accessories available for use with the Type TB404 sen-
sors.
Table 1-4. Accessories
Description
15 ⁄
-20 x ¾ in. NPT), CPVC
16
15 ⁄
-20 x ¾ in. NPT), Kynar
16
15 ⁄
-20 x ¾ in. NPT), 316 stainless steel
16
1