Konica Minolta bizhub C360i Quick Manual page 92

9
Replacing a Saddle Staple Cartridge (for Finisher FS-536 SD)
Tips
-
The figure shows the Finisher FS-536 SD equipped with Punch Kit PK-520 and Relay Unit RU-513.
-
Do not remove staples that remain in the machine. Otherwise, the stapling function will activate but no
sheets will be stapled.
NOTICE
When moving the Saddle Stitcher, be sure to only hold the handle. Otherwise, your hand or finger may get
caught in the machine.
Be sure to replace the Staple Cartridge after the relevant message has appeared. If a Staple Cartridge is
removed before the relevant message appears, it may result in a failure.
9-16
When a message appears to replace consumables or carry out cleaning
Saddle Staple Cartridge 1
Saddle Staple Cartridge 2
Saddle Stitcher
bizhub C360i/C300i/C250i
9.4