Safety Information - Konica Minolta bizhub C360i Quick Manual

1.3

Safety information

1.3 Safety information
This section contains detailed instructions on the operation and maintenance of this machine. To achieve op-
timum utility of this device, all operators should carefully read and follow the instructions in this manual.
Please read the following section before connecting the machine to the supply. It contains important infor-
mation related to user safety and preventing equipment problems.
Make sure that you observe all of the precautions that appear in different sections of this manual.
Reference
- Some parts of the contents of this section may not correspond with the purchased product.
Warning and precaution symbols
Be sure to observe the safety precautions.
This manual contains the instructions that should be strictly observed at all times to prevent injury to yourself
and other persons as well as damage to property.
Injuries and damage that might be caused by using the product improperly are classified according to the
following symbols.
Pictorial indication
WARNING
CAUTION
These are some of major exemplary graphical symbols.
Graphic
symbols
Power source connection
WARNING
Do not use any power cord other than the one supplied in the package or attached on the
products. If a power cord is not supplied, use only the power cord and plug that are specified
in the user documentation. Failure to use this cord could result in a fire or electrical shock. If
the power cord supplied in the package cannot be used in the country where this product was
sold, use a power cord that meets the following conditions or contact your Technical Repre-
sentative.
• The power cord has voltage and current rating appropriate for the rating plate on this ma-
chine.
• The power cord meets regulatory requirements for the area.
• The power cord is provided with grounding pin/terminal.
Do not use the power cord to other products. Failure to do that could result in a fire or electrical
shock.
Do not scratch, abrade, place a heavy object on, heat, twist, bend, step on, pull on, or damage
the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could
result in a fire or breakdown. Should any of these conditions be found, immediately turn OFF
the power switch, unplug the power cord from the power outlet, and then call your authorized
service representative.
Do not use the power source voltage other than being specified on the machine. Failure to do
that could result in a fire or electrical shock.
bizhub C360i/C300i/C250i
Description
Improper handling can cause serious injury or death.
Improper handling can cause minor injury or damage to houses and property.
Descriptions Graphic
symbols
General prohibition
General instruction
General precaution
Descriptions Graphic
symbols
Do not disassemble
Ground/Earth
High temperature
1
Descriptions
Do not touch
Unplug from outlet
Electrical shock
hazard
1-5