Installing the TV
20
1
Connect the display interface cable (supplied) to the display unit's DISPLAY
SIGNAL IN jack, and connect the AC power cord (supplied) to the display
unit's AC IN jack.
Disconnect all power sources before making any connections.
Display interface
cable (supplied)
2
Secure the AC power plug to the display's AC IN jack.
AC IN (Power
supply input)
jack of the
display
AC power cord
(supplied)
Attach the AC plug holder
1
(supplied) to the AC
power cord.
When you unplug the AC power cord, drag the AC plug holder
down by pushing both sides of the holder, then pull out the
plug.
SONY EXCLUSIVE CABLE ONLY
AC IN
BLACK
WHITE
DISPLAY SIGNAL IN
Tighten the
screw slowly
until the
screw is
stabilized.
AC plug holder
(supplied)
Clip on to the AC IN
2
jack until you hear
clicking.
AC Power cord
(supplied)