Sony WEGA KE 42XBR900 Operating Instructions Manual page 35

Rear of Media receiver unit
R–AUDIO–L
AUDIO SUBWOOFER
OUT OUT
(VAR/FIX) (VAR)
1
3
R–AUDIO–L VIDEO S VIDEO
VIDEO IN
Notes on Using This Connection
To Do This ...
Watch cable (unscrambled)
channels
Watch cable box (scrambled)
channels
Watch the VCR
Set up the TV remote control to
operate the cable box or VCR
Activate the remote control to
operate the cable box or VCR
Control specific cable box and
VCR functions with the TV
remote control
Label video inputs to easily
identify equipment connected to
the TV
TO
VHF/UHF AUX
CONVERTER
6
DVI–HDTV R–AUDIO–L
DVI–HDTV IN
WHITE BLACK
DISPLAY SIGNAL OUT
VCR
A/V cable
Do This ...
TV/VIDEO
Press repeatedly to select the cable input (UHF/VHF in the illustration).
Turn on the VCR and tune it to the channel the cable box is set to (usually channel 3
TV/VIDEO
or 4). Press
illustration). Use the cable box to change channels.
TV/VIDEO
Press repeatedly to select the VCR input (VIDEO 1 in the illustration).
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on page 54.
For the cable box, press
lights up. For the VCR, press
lights up.
See "Operating a Cable Box" on page 57 and "Operating a VCR" on page 56.
See the instructions for setting up Video Labels on page 90.
Do not leave the display indication of the cable box and VCR
turned on.
Antenna cable
(supplied)
Cable box
Coaxial cable
repeatedly to select the VCR input (VIDEO 1 in the
FUNCTION
repeatedly until the
FUNCTION
repeatedly until the
Splitter
(not supplied)
CATV
cable
Cable box
SAT/CABLE
indicator
DVD/VCR
indicator
33