Two Vcrs For Tape Editing - Sony WEGA KE 42XBR900 Operating Instructions Manual

Two VCRs for Tape
Editing
Playback VCR
A/V cable
34
Connecting two VCRs lets you record from one VCR to the other. By
connecting them as shown below, you can view (monitor) what is being
recorded.
To connect two VCRs for tape editing
1
Use an A/V cable to connect the playback VCR's A/V output jacks to
the TV's A/V input jacks.
2
Use an A/V cable to connect the recording VCR's A/V input jacks to the
TV's MONITOR OUT jacks.
Using S VIDEO jacks? See page 29.
Rear of Media receiver unit
VHF/UHF
R–AUDIO–L
AUDIO SUBWOOFER
OUT OUT
(VAR/FIX) (VAR)
1
DVI–HDTV
3
WHITE
R–AUDIO–L VIDEO S VIDEO
VIDEO IN DISPLAY SIGNAL OUT
When connecting two VCRs for tape editing;
– you cannot edit a tape with copy protection.
– do not connect the TV's A/V input jack and output jack to your
VCRs at the same time to avoid looping the signal.
TO
AUX
CONVERTER
R–AUDIO–L VIDEO S VIDEO
MONITOR OUT
R–AUDIO–L 6
DVI–HDTV IN ~
AC IN
BLACK
Recording VCR
A/V cable